When using magnetic pump s, customers often choose variable frequency motors instead of ordinary motors. Many people dont know the difference between the two, so lets take a brief look. 1. The difference in the design of ordinary motors and...

After the power of the magneticDrivepump is suddenly cut off, the magnetic pump and the prime mover will rotate freely, which will cause serious damage to the system. Except in rare cases with flywheels, pumps and prime movers usually have...

Generally, when selecting a magnetic pump , we will ask the user how much flow head is required? If the flow head cannot be determined, the correct selection cannot be made. Sometimes when the customer asks how much flow head is required, a...

When we use gear oil pumps, we will encounter many failures and the reasons for these failures are also different. Our elimination method based on the production of gear oil pumps for many years: (1) Seasonally add or change the engine oil...

The flow rate of the stainless steel gear pump can be adjusted by changing the characteristic curve of the stainless steel gear pump pipeline, the series and parallel connection of the pump, the flow rate can be adjusted by adjusting the pi...

In recent years, surface adhesion coating technology has been widely used in the maintenance of equipment in our country, and is suitable for the repair of parts and equipment of various materials. Its working principle is to add special fi...

The remote control part and control core of the stainless steel gear pump use high-performance programmable controllers. The detection part is divided into two parts: one is the analog quantity detection part. It is mainly used to detect th...

According to the law of proportionality and the law of cutting, changing the speed of the stainless steel gear pump and changing the pump structure (such as cutting impeller outer diameter method, etc.) can change the characteristic curve o...