Gear oil pumps and gear pumps with different tooth profiles are suitable for different occasions, which are embodied in the following aspects. Gear oil pumps and gear pumps with different tooth profiles are suitable for different occasions....

How to extend the service life of KCB gear pump 1. Turn on when there is a problem with the power supply voltage When the power supply voltage is relatively low, try not to turn on it. If it is turned on, the KCB gear pumps operating power...

The magnetic drive pump is a kind of non-contact torque transmission through magnetic transmission, so that the static seal replaces the dynamic seal, so that the pump is completely leak-free. Because the pump shaft and inner magnetic rotor...

The principle of selection of KCB gear pump seals is that for occasions with low requirements, they can be selected based on experience and replaced when they are not suitable. Generally speaking, at room temperature and low pressure, choos...

KCB stainless steel gear oil pump usage description: 1. It is suitable for conveying various oils, such as heavy oil, diesel oil, and lubricating oil. It is equipped with copper gears to convey low-point liquids, such as gas oil and stupid....

The stainless steel gear pump produces important performance in specific use. It adopts a certain structure and performance in the design, and works and uses according to certain usage methods and principles. It can exert good advantages an...

The safety valve is also an important accessory part of the positive displacement gear oil pump. Each positive displacement gear needs to be equipped with a safety valve. If the pump is self-provided, it is not necessary. The repair of the...

The faults in gear pump operation are divided into four types: corrosion and wear, mechanical failure, performance failure and shaft seal failure. These four types of failures often affect each other and are difficult to separate. For examp...