+8617731766260/18233754501 
fan@saikenpumps.com
How to extend the service life of KCB gear pump
1. Turn on when there is a problem with the power supply voltage
When the power supply voltage is relatively low, try not to turn on it. If it is turned on, the KCB gear pump's operating power will not reach the normal level, and it will also cause the winding to be burned or damaged due to energization; when the voltage is too high , It will also cause damage to the motor by heating. Therefore, when the KCB gear pump is running, the value of the pump power supply voltage must be observed at any time. When the power supply voltage changes abnormally, the operation should be stopped immediately for inspection and treatment.
2. Rotation direction of KCB gear pump unit
The rotation direction of the KCB gear pump motor. If the rotation direction is not correct, the KCB gear pump will produce water due to the reverse rotation, which will burn the motor.
3. Switch frequently
The KCB gear pump is switched on and off at a high frequency, which may cause backflow when the KCB gear pump is running, which will start the motor load and cause the motor to burn.
4. Routine maintenance
Regularly maintain and maintain the KCB gear pump, so that you can know the condition of the KCB gear pump, and know which parts of the KCB gear pump need to be replaced and repaired, which will improve the operating efficiency of the KCB gear pump and also Greatly extend the service life of the KCB gear pump.
Gear pump manufacturers and suppliers from China
+8617731766260/18233754501
+86-317-8227664
+8618233754501