The main function of the gear pump valve is to prevent the gear pump outlet pipeline from being blocked or the gear pump outlet pressure is too high to cause the gear pump motor to burn or damage the pipeline equipment. The main function of...

Introduce the development direction of gear pump hydraulic transmission system The gear pump hydraulic transmission system is developing in the direction of fast response, small size and low noise. In order to meet this requirement, in addi...

After the gear oil pump drive shaft bushing hole is worn, the reaming method can be used to eliminate the wear marks, and then a bushing enlarged to the corresponding size is used. The driven shaft hole wear is also reamed to eliminate the...

1. According to the arrangement of the device, terrain conditions, water level conditions, and operating conditions, determine the choice of horizontal, vertical and other types (pipeline, submersible, submerged, non-blocking, etc.) pumps....

The direction of rotation of the kcb gear pump should be consistent with the inlet and outlet ports. If the kcb gear pump is operated for the first time, or used after a long period of idle, it is best to run for about an hour under no-load...

The first-class asphalt pump body is made of HT200, gears, shafts, sleeves, etc. are made of carbon steel, and the applicable temperature is within 200C; The second-class gear asphalt pump body is made of carbon steel 45#, gears, shafts, sl...

Before the hot oil pump is started, the pump casing is filled with the liquid being transported; after the start, after the start, the impeller is driven by the shaft to rotate at a high speed, and the liquid between the blades must also ro...

Pump is a kind of thing that provides power for transporting substances. There are many types of pumps, including ordinary water pumps, gear pumps, and a high viscosity pump. Compared with some ordinary pumps, high-viscosity pumps have many...