+8617731766260/18233754501 
fan@saikenpumps.com
Correctly mastering the use of diaphragm pumps can effectively improve engineering benefits and slow down the wear rate of diaphragm pumps. At present, diaphragm pumps on the market are divided into pneumatic and electric types. Different types of equipment have different daily use and maintenance.
Regarding the question of how to use the diaphragm pump, according to the model, the first thing to pay attention to is that the air filter and pressure gauge are installed in the pneumatic diaphragm pump, and the pressure monitoring of the pneumatic pump can detect abnormalities in time; and when using the electric pump , It is recommended not to install the valve as much as possible. If it must be installed, the working pressure should be controlled below 4 kg. In addition, pay attention to oiling to ensure the normal lubrication system. In order for you to have a more correct understanding of the usage of the two pumps, the following will briefly introduce them separately.
Electric diaphragm pump: In terms of application, it can replace some centrifugal pumps and screw pumps. It can be mainly used in ceramics, metallurgy, petrochemical and other industries. It is suitable for low pressure and can be used in occasions where the outlet pressure is less than 3kgf/cm2. When using this pump, please note that it can only be used in environments where the temperature is lower than 40℃, and the motor temperature should be controlled below 75℃. If the transport medium is prone to precipitation or condensation, the accumulation in the pump body needs to be cleaned afterwards.
Pneumatic diaphragm pump: The pump only needs to open or close the gas valve when in use, it is very convenient to use, even if it is dry running and sudden shutdown, it will not damage the pump body. It is also very reliable in terms of performance, with self-protection performance, and will automatically stop under overload to ensure that the pump body is not damaged. In addition, the equipment can be submerged in the medium industry, and does not need to use lubricating oil like an electric diaphragm pump, and it is relatively convenient to use.
The above is the introduction of the use method of the diaphragm pump. Each device is accompanied by a detailed product manual. The equipment user only needs to operate according to the content of the manual. If you have any questions about the operation, you can also directly contact the customer service on the site. Come get professional answers.
+8617731766260/18233754501
+86-317-8227664
+8618233754501