Features of pneumatic diaphragm pump:
1. Compressed air is the power.
2. It is a positive displacement pump whose volume changes caused by the reciprocating deformation of the diaphragm. Its working principle is similar to that of a plunger pump. Due to the characteristics of the working principle of the diaphragm pump, the diaphragm pump has the following characteristics:
(1) The pump will not overheat: compressed air is used for power, and it is a process of expansion and heat absorption during exhaust. The temperature of the pneumatic pump is reduced when it is working, and no harmful gas is discharged.
(2) No electric sparks: The pneumatic diaphragm pump does not use electricity as power, and prevents static sparks after being grounded.
(3) Liquids containing particles can be passed: because the volumetric work and the inlet is a ball valve, it is not easy to be blocked.
(4) The shearing force on the material is extremely low: how to suck in and out when working, so the agitation to the material is minimal, suitable for the transportation of unstable materials
(5) The flow can be adjusted, and a throttle valve can be installed at the material outlet to adjust the flow.
(6) It has the function of self-priming.
(7) It can run dry without danger.
(8) Can dive for work.
(9) The fluid that can be transported is extremely wide, from low viscosity to high viscosity, and viscous from corrosive.
(10) No complicated control system, no cables, fuses, etc.
(11) Small size, light weight and easy to move.
(12) There is no need for lubrication, so it is easy to maintain and will not pollute the working environment due to dripping.
(13) The pump can always maintain high efficiency and will not be reduced due to wear.
(14) 100% energy utilization, when the outlet is closed, the pump will automatically stop, the equipment will move, wear, overload, and heat
Diaphragm pump manufacturers and suppliers come from China