+8617731766260/18233754501 
fan@saikenpumps.com
1) The thermal insulation asphalt pump has a simple and compact structure and is easy to install and use.
2) It has good self-priming performance, no need to add liquid before starting the pump each time, so it is very convenient to use. ,
3) The heating pipe adopts standard flange connection, the sealing surface is convenient to connect, and the sealing is reliable.
4) The high-temperature medium flow parts of the thermal insulation asphalt pump are made of Q235 cast carbon structural steel and have been pressure tested. Therefore, the pump has good thermal adaptability and is safe and reliable.
Precautions for thermal insulation asphalt pump
1) The following items should be checked for the first start of the insulation asphalt pump after installation:
①Whether the valves on the inlet and outlet pipelines are open;
②Whether the rotation direction of the pump is correct (the pump is clockwise from the perspective of the motor)
③Pay attention to whether the value of the outlet pressure gauge of the pump is within the specified technical specifications; ④Pay attention to whether there is abnormal noise or overheating in the movement of the pump.
2) If the seal of the thermal insulation asphalt pump leaks, please evenly tighten the bolts or nuts on the sealing gland, but be careful not to adjust too tightly to avoid violent heat generation. Reduce the use of the pump shaft and sealing ring.
3) When the viscosity of the thermal insulation asphalt pump is too high, it will produce vibration, noise and intermittent sound. The medium should be heated in time to reduce the viscosity, otherwise the pump bearing will be damaged.
4) After the thermal insulation asphalt pump is stopped, first cut off the power supply, and then close the valve on the discharge pipe to avoid causing the pump to reverse
+8617731766260/18233754501
+86-317-8227664
+8618233754501