+8617731766260/18233754501 
fan@saikenpumps.com
Pneumatic diaphragm pump dosing pump manufacturers:
Pneumatic diaphragm pumps have the advantages of impurity pumps, self-priming pumps, mud pumps, submersible pumps and other conveying machinery. Pneumatic diaphragm pump has the characteristics of beautiful structure, good physical resistance and durability. It is suitable for various corrosive liquids, particles, high viscosity, volatile, flammable, explosive, ceramic glaze slurry, fruit slurry, glue, oil tanker Liquids such as oil recovery at the bottom of the silo and temporary tank dumping can be exhausted.
1. No need to irrigate and divert water, the suction lift is up to 5m, the head is up to 70m, and the outlet pressure is ≥6kg/cm2.
2. The flow is spacious and the passing performance is good, allowing large particles up to 10mm in diameter. When pumping mud and impurities, there is little wear on the pump;
3. The head and flow can be adjusted steplessly through the valve opening (air pressure adjustment is between 1-7kg/cm2).
4. It can transport relatively viscous liquids (viscosity below 10,000 centipoise), without oil lubrication, even if idling, it has no effect on the pump.
Pneumatic diaphragm dosing pumps are widely used in various fields such as daily chemical industry, ceramics industry, paper industry, electronics industry, textile industry, chemical industry, mining industry, water treatment, food industry, paint, construction, metallurgy, petrochemical, etc.
+8617731766260/18233754501
+86-317-8227664
+8618233754501